Denon AVR-985S Owners Manual - Page 11
Connecting the MULTI ZONE jacks
UPC - 081757506106
View all Denon AVR-985S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connecting the MULTI ZONE jacks For instructions on operations using the MULTI ZONE FUNCTIONS. (See page 65 ~ 67) [1] ZONE 2 preout CONNECTIONS • If another power amplifier or pre-main (integrated) amplifier or is connected, the ZONE2 preout (variable/fixed level) jacks can be used to play a different program source in ZONE2 the same time. (See page 67) • The ZONE2 video out is only for the ZONE2. ZONE2 Integrated pre-main amplifier RC-617INFRARED or power amplifier SENSOR OUTPUT B + RC-616 INFRARED RETRANSMITTER INPUT + AUX OUT L R Extension jacks for future use. CONTROL terminal Perform the following operation before using an external controller connected to the RS--232C terminal: 1. Press the ON/STANDBY button on the main unit and set the unit to the operating mode. 2. Perform the operation to turn off the power from the external control. 3. Check that the product has been set to the standby mode. After checking the above, check the connections of the external controller. Operation is possible. [2] ZONE2 SPEAKER OUT and PREOUT CONNECTIONS • If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 output terminals can be used to play a different program source in ZONE2 the same time. • ZONE2 SPEAKER OUT can be used when "ZONE2" is selected at System Setup Menu "Power Amp Assign". In this case , Surround Back Speaker OUT cannot be used for MAIN ZONE. (See page 43) ZONE2 Integrated pre-main amplifier RC-617 INFRARED or power amplifier SENSOR OUTPUT B + INPUT + RC-616 INFRARED RETRANSMITTER AUX OUT L R Extension jacks for future use. NOTE: • The settings must be changed to use this speaker for ZONE2. (See page 43.) (L) (R) SURROUND BACK/ZONE2 SPEAKER SYSTEMS 11