Denon AVR-985S Owners Manual - Page 65

Multi Zone

Get Denon AVR-985S - AV Receiver PDF manuals and user guides
UPC - 081757506106
View all Denon AVR-985S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

10 MULTI ZONE Multi-zone playback with multi-source MULTI ZONE MUSIC ENTERTAINMENT SYSTEM • When the outputs of the "ZONE2" OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the main zone in which this unit and the playback devices are installed. (Refer to ZONE2 on the diagram below.) • ZONE2 SPEAKER OUT can be used when "ZONE2" is selected at System Setup Menu "Power Amp Assign".In this case, Surround Back Speaker OUT cannot be used for MAIN ZONE. (See page 43.) • When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the main zone can be controlled from ZONE2 using the remote control unit. To control playback devices other than the ones above, either use that device's remote control unit or preset a separately sold programmable remote control unit. NOTES: • For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming or noise. • For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions. • When the PURE DIRECT mode is set for the main zone, no signals are output to the ZONE2 video terminals. • Signals are output from the ZONE2 video terminals even when ZONE2 is set to "OFF". MULTI ROOM MUSIC ENTERTAINMENT SYSTEM 2 When using the SURR.BACK/ZONE2 amplifier as the SURROUND BACK. The AVR-2805/985 is equipped with pre-out terminals for which the volume is adjustable (ZONE2) and composite video output terminals as the ZONE2 output terminals. (1) System configuration and connections example. Using external amplifier MAIN ZONE 7.1-channel systems Monitor FL DVD player B SL Center This unit FR ZONE2 VIDEO OUT Input SW ZONE2 AUDIO OUT (VARIABLE OUT) SR ZONE 2 Monitor B Premain Amplifier or Power Amplifier RC-616 SBL SBR SYSTEM REMOTE CONTROL UNIT RC-974 PROGRAMMABLE REMOTE CONTROL UNIT RC-617 ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line MULTI SOURCE AUDIO signal cable ZONE2 VIDEO signal cable * Refer to CONNECTIONS on pages 6 to 13. 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
65
10
MULTI ZONE
Multi-zone playback with multi-source
MULTI ZONE MUSIC ENTERTAINMENT SYSTEM
•
When the outputs of the
“
ZONE2
”
OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources
can be played in rooms other than the main zone in which this unit and the playback devices are installed. (Refer to ZONE2 on the diagram
below.)
•
ZONE2 SPEAKER OUT can be used when
“
ZONE2
”
is selected at System Setup Menu
“
Power Amp Assign
”
.In this case, Surround Back
Speaker OUT cannot be used for MAIN ZONE. (See page 43.)
•
When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and
ZONE2, the remote-controllable devices in the main zone can be controlled from ZONE2 using the remote control unit.
To control playback devices other than the ones above, either use that device
’
s remote control unit or preset a separately sold programmable
remote control unit.
NOTES:
•
For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming or noise.
•
For instructions on installation and operation of separately sold devices, refer to the devices
’
operating instructions.
•
When the PURE DIRECT mode is set for the main zone, no signals are output to the ZONE2 video terminals.
•
Signals are output from the ZONE2 video terminals even when ZONE2 is set to
“
OFF
”
.
MULTI ROOM MUSIC ENTERTAINMENT SYSTEM
2
When using the SURR.BACK/ZONE2 amplifier as the SURROUND BACK.
The AVR-2805/985 is equipped with pre-out terminals for which the volume is adjustable (ZONE2) and composite video output terminals as
the ZONE2 output terminals.
(1)System configuration and connections example.
Using external amplifier
RC-617
This unit
Premain Amplifier
or Power Amplifier
DVD player
Input
FL
FR
Center
SL
SR
SW
SBR
SBL
RC-616
PROGRAMMABLE
REMOTE CONTROL UNIT
SYSTEM REMOTE CONTROL
UNIT RC-974
MAIN ZONE 7.1-channel systems
ZONE 2
Monitor
Monitor
ZONE2 AUDIO OUT
(VARIABLE OUT)
MULTI SOURCE AUDIO signal cable
*
Refer to CONNECTIONS on pages 6 to 13.
ZONE2 VIDEO signal cable
ROOM-TO-ROOM REMOTE CONTROL SYSTEM
(separately sold) control line
ZONE2 VIDEO OUT