Denon AVR2307CI Owners Manual - English - Page 64

Setting the Subwoofer Setup, Setting the Distance, Preparations

Page 64 highlights

ENGLISH Advanced Setup - Part 2 Setting the Subwoofer Setup Setting the Distance 1 Select the method of playback of the subwoofer for playing the low This parameter is for optimizing the timing with which the audio bass signals. signals are produced from the speakers and subwoofer according to the listening position. 1 Press D H to select "Subwoofer Setup", then press ENTER. Preparations: Measure the distances between the listening position and the 2 Press F G to set. speakers (L1 to L8 on the diagram at the below). 3 FL C FR LFE: For any channel(s) that are set to "Large", low frequencies in that channel's corresponding source are directed to that loudspeaker only. The low frequencies played from the subwoofer are only the LFE signals and the low frequencies of channels set to "Small". SW LFE+Main: L1 L3 L2 Low frequencies from speaker channels that have been set to L4 Listening position "Large" are reproduced from those speakers as well as from the subwoofer(s). L5 L6 3 Press ENTER. SL L7 L8 SR Advanced Setup - Part 2 2 ..... L1 ..... L2 ..... L3 ..... L4 ..... L5 ..... L6 ..... L7 ..... L8 1 2 SBL SBR 1 Press D H to select "Distance", then press ENTER. 2 Press F G to select "Meters" or "Feet". • The subwoofer mode setting is only valid when and "Yes" is set for the subwoofer in the "Setting the Speaker Configuration". • Select the "LFE+Main" mode if you want low frequency signals to always be played from the subwoofer channel. • Select the mode achieving a voluminous bass sound when playing music or movie sources. 3 Press D H to select the speaker, then press F G to set. 4 Press ENTER. • Press D to select "Step", then press F G to change the amount of variation if so desired. • The distance changes in units of 1 foot (0.1 meters) or 0.1 foot (0.01 meters) each time the button is pressed. Select the value closest to the measured distance. • Please note that the difference of distance for every speaker should be 20 ft (6.0 m) or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In such cases, move the appropriate speaker to the position of the displayed value. 61 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

ENGLISH
ENGLISH
61
Advanced Setup – Part 2
Advanced Setup – Part 2
Setting the Subwoofer Setup
Select the method of playback of the subwoofer for playing the low
bass signals.
Press
DH
to select “Subwoofer Setup”, then press
ENTER
.
Press
FG
to set.
LFE:
For any channel(s) that are set to “Large”, low frequencies in that
channel’s corresponding source are directed to that loudspeaker
only. The low frequencies played from the subwoofer are only the
LFE signals and the low frequencies of channels set to “Small”.
LFE+Main:
Low frequencies from speaker channels that have been set to
“Large” are reproduced from those speakers as well as from the
subwoofer(s).
• The subwoofer mode setting is only valid when and “Yes” is set for
the subwoofer in the “Setting the Speaker Configuration”.
• Select the “LFE+Main” mode if you want low frequency signals to
always be played from the subwoofer channel.
• Select the mode achieving a voluminous bass sound when playing
music or movie sources.
Press
ENTER
.
1
2
3
Setting the Distance
This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
Preparations:
Measure the distances between the listening position and the
speakers (L1 to L8 on the diagram at the below).
Press
DH
to select “Distance”, then press
ENTER
.
L1
L2
L3
L4
L5
L6
L7
L8
C
FR
FL
SW
Listening position
SL
SR
SBL
SBR
1
1
2
Press
FG
to select “Meters” or “Feet”.
2
Press
DH
to select the speaker, then press
FG
to set.
3
Press
ENTER
.
4
• Press
D
to select “Step”, then press
FG
to change the amount of
variation if so desired.
• The distance changes in units of 1 foot (0.1 meters) or 0.1 foot (0.01
meters) each time the button is pressed. Select the value closest to
the measured distance.
Please note that the difference of distance for every speaker
should be 20 ft (6.0 m) or less. If you set an invalid distance, a
CAUTION notice, such as screen right will appear. In such cases,
move the appropriate speaker to the position of the displayed
value.
1
2
3
.....
L1
.....
L2
.....
L3
.....
L4
.....
L5
.....
L6
.....
L7
.....
L8