Denon AVR2307CI Owners Manual - English - Page 77

Specifications - a v receiver

Page 77 highlights

Specifications ¢ Audio section • Power amplifier Rated output: Front (A, B): 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround Back: 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Dynamic power: 120 W x 2 ch (8 Ω/ohms) 170 W x 2 ch (4 Ω/ohms) Output terminals: Front: A or B 06 ~ 16 Ω/ohms A + B 12 ~ 16 Ω/ohms Center, Surround, Surround. Back: 06 ~ 16 Ω/ohms • Analog Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz: +1, -3 dB (DIRECT mode) S/N: 100 dB (IHF-A weighted) (DIRECT mode) Distortion: 0.008% (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: 1.2 V • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output / Maximum output: 150 mV / 7 V Distortion factor: 0.03% (1 kHz, 3 V) ¢ Video section • Standard video terminals Input / output level and impedance: Frequency response: • S-Video terminals Input / output level and impedance: Frequency response: • Color component video terminal Input / output level and impedance: Frequency response: 1 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω/ohms PB/CB signal - 0.7 Vp-p, 75 Ω/ohms PR/CR signal - 0.7 Vp-p, 75 Ω/ohms 5 Hz ~ 100 MHz - +0, -3 dB ENGLISH ¢ Tuner section Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total Harmonic Distortion (at 1 kHz): [FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.5 MHz ~ 107.9 MHz 1.0 µV (11.2 dBf) MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) MONO 77 dB (IHF-A weighted) STEREO 72 dB (IHF-A weighted) MONO 0.15 % STEREO 0.3 % [AM] 520 kHz ~ 1710 kHz 18 µV ¢ General Power supply: Power consumption: Maximum external dimensions: Mass: AC 120 V, 60 Hz 5.5 A 1 W Max (Standby) 434 (W) x 171 (H) x 417 (D) mm (17-3/32" x 6-47/64" x 16-27/64") 13 kg (28 lbs 11 oz) ¢ Remote control unit (RC-1043) Batteries: R6P/AA Type (Two batteries) External dimensions: 52 (W) x 243 (H) x 21 (D) mm (2-3/64" x 9-9/16" x 53/64") Mass: 175 g (Approx. 6.2 oz) (included batteries) * For purposes of improvement, specifications and design are subject to change without notice. 74 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

ENGLISH
ENGLISH
74
Specifications
¢
Audio section
Power amplifier
Rated output:
Front (A, B):
100 W + 100 W
(8
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W
(6
/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
100 W
(8
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W
(6
/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
100 W + 100 W
(8
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W
(6
/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
100 W + 100 W
(8
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W
(6
/ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power:
120 W x 2 ch
(8
/ohms)
170 W x 2 ch
(4
/ohms)
Output terminals:
Front:
A or B
0
6 ~ 16
/ohms
A + B
12 ~ 16
/ohms
Center, Surround, Surround. Back:
0
6 ~ 16
/ohms
• Analog
Input sensitivity / input impedance:
200 mV / 47 k
/kohms
Frequency response:
10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)
S/N:
100 dB (IHF-A weighted) (DIRECT mode)
Distortion:
0.008% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output:
1.2 V
Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting, with 5 mV input)
Rated output / Maximum output:
150 mV / 7 V
Distortion factor:
0.03% (1 kHz, 3 V)
¢
Video section
Standard video terminals
Input / output level and impedance:
1 Vp-p, 75
/ohms
Frequency response:
5 Hz ~ 10 MHz
+0, –3 dB
S-Video terminals
Input / output level and impedance:
Y (brightness) signal
1 Vp-p, 75
/ohms
C (color) signal
0.286 Vp-p, 75
/ohms
Frequency response:
5 Hz ~ 10 MHz
+0, –3 dB
Color component video terminal
Input / output level and impedance:
Y (brightness) signal
1 Vp-p, 75
/ohms
P
B
/C
B
signal
0.7 Vp-p, 75
/ohms
P
R
/C
R
signal
0.7 Vp-p, 75
/ohms
Frequency response:
5 Hz
~ 100 MHz
+0, –3 dB
¢
Tuner section
[FM]
[AM]
(note: μV at 75
/ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range:
87.5 MHz ~ 107.9 MHz
520 kHz ~ 1710 kHz
Usable Sensitivity:
1.0 μV (11.2 dBf)
18 μV
50 dB Quieting Sensitivity:
MONO
1.6 μV (15.3 dBf)
STEREO
23 μV (38.5 dBf)
S/N (IHF-A):
MONO
77 dB (IHF-A weighted)
STEREO
72 dB (IHF-A weighted)
Total Harmonic Distortion (at 1 kHz):
MONO
0.15 %
STEREO
0.3 %
¢
General
Power supply:
AC 120 V, 60 Hz
Power consumption:
5.5 A
1 W Max (Standby)
Maximum external dimensions:
434 (W) x 171 (H) x 417 (D) mm (17-3/32” x 6-47/64” x 16-27/64”)
Mass:
13 kg (28 lbs 11 oz)
¢
Remote control unit (RC-1043)
Batteries:
R6P/AA Type (Two batteries)
External dimensions:
52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)
Mass:
175 g (Approx. 6.2 oz)
(included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.