Denon AVR2307CI Owners Manual - English - Page 65
Enter, Test Tone]
UPC - 081757507103
View all Denon AVR2307CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
ENGLISH Advanced Setup - Part 2 Setting the Channel Level Set the volume of the various speakers so that the sound output from the speakers and the subwoofer seems to have the same volume level. 1 Press D H to select "Channel Level", then press ENTER. 2 Press F G to set. Auto: Adjust the level while listening to the test tones produced automatically from each speaker. Test tones are automatically emitted from each speaker. Manual: Adjust with the speaker from which the test tone is output switched manually. 3 Press D H to select "Test Tone Start", then press F to select "Yes". 1 2 3 4 -1 • To cancel the setting, press H and select "Level Clear", then press F and select "Yes". Advanced Setup - Part 2 ¢ Adjusting the test tone using the remote control unit Adjustment of the test tones using the remote control unit is only possible in the "Auto" mode and only valid in the STANDARD (Dolby / DTS Surround) mode. The adjusted levels are automatically stored for the different surround modes. 1 Press [TEST TONE]. • Test tones are output from the different speakers. 2 Press F G to adjust the volume. 3 Press [TEST TONE]. 4 When "Auto" mode is selected: Press F G to adjust the volume. -1 • Test tones are output automatically, in the order shown below. FL C FR SR (2 speakers) SW SL SBL SBR SB (1 speaker) The volume can be adjusted within the range -12.0 dB to +12.0 dB. • To adjust the channel level separately for the different play modes after setting the channel level, perform the operation on page 36. 4 When "Manual" mode is selected: Press D H to select the speaker, then press F G to -2 adjust the volume. 5 Press ENTER. 62 ENGLISH