Dymo 15517 User Guide - Page 3

About Your New Printer With your new DYMO RhinoPRO™ 5000 printer, you can create a wide variety of high-quality, selfadhesive labels. You can choose to print your labels in many different sizes and styles. The printer uses RhinoPRO Industrial label cassettes in widths of 1/4" (6 mm), 3/8" (9 mm), 1/2" (12 mm), or 3/4" (19 mm). RhinoPRO label cassettes are also available in a wide range of materials. Visit www.dymo.com/industrial for information on obtaining tapes and accessories for your printer. Warranty Registration Please complete the warranty registration card and return it to the appropriate customer service address within seven days. Visit www.dymo.com/ industrial for details. Getting Started Follow the instructions in this section to get started by printing your first label. Power Supply The printer can operate on AC or battery power. To save power, the printer will automatically turn off after five minutes of inactivity. Inserting the Batteries The printer uses six AA batteries. To insert the batteries 1. Press the thumb latch on the bottom of the labelmaker to open the battery compartment door. See Figure 2. Press thumb latch Figure 2 2. Insert the batteries following the polarity markings (+ and -). 3. Close the compartment door. Remove the batteries if the printer will not be used for a long period of time. Connecting the AC Adapter Connecting the AC adapter to the printer disconnects the batteries as a power source. To connect the AC adapter 1. Plug the power adapter into the power connector on the top, left side of the printer. Figure 3 2. Plug the other end of the power adapter into a power outlet. Inserting the Tape Cassette Your printer comes with one label tape cassette. Visit www.dymo.com/industrial for information about purchasing additional label cassettes. 3