Dymo 15605 Instruction Manual - Page 3

About Your New Printer With your new DYMO RhinoPRO™ 3000 label printer, you can create a wide variety of highquality, self-adhesive labels. You can choose to print your labels in many different sizes and styles. The printer uses DYMO RhinoPRO Industrial label cassettes in widths of 3/8" (9 mm), or 1/2" (12 mm). RhinoPRO label cassettes are also available in a wide range of materials. Visit www.dymo.com/industrial for information on obtaining tapes and accessories for your printer. Warranty Registration Please complete the warranty registration card and return it to the appropriate address, or you can register online at www.dymo.com/industrial. Getting Started Follow the instructions in this section to print your first label. Power Supply The printer is powered by standard batteries or an AC power adapter. To save power, the printer will automatically turn off after five minutes of inactivity. Inserting the Batteries The printer uses six 1.5 volt AA alkaline batteries. To insert the batteries 1. Press the thumb latch on the bottom of the printer to open the battery compartment door. See Figure 2. Press thumb latch Figure 2 2. Insert the batteries following the polarity markings (+ and -). 3. Close the battery compartment door. Remove the batteries if the printer will not be used for a long period of time. Connecting the AC Adapter You can also use an optional AC power adapter to power the printer. Connecting the AC adapter disconnects the batteries as a power source. To connect the AC adapter 1. Plug the power adapter into the power connector on the top of the printer. Figure 3 2. Plug the other end of the power adapter into a power outlet. 3