Dymo 15605 Instruction Manual - Page 8
Using the Hot Key Functions - tape
View all Dymo 15605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Deleting a Label from Memory When you no longer need a stored label, you can delete it from memory. To delete a label from memory 1. Press . RECALL The memory locations are displayed. 2. Use the arrow keys to move to the memory location that contains the label you want. 3. Press + and then press ESC to clear the memory location. Using the Hot Key Functions Your printer includes several Hot KeyTM functions that allow you to print specific types of labels. Hot Keys are available for printing flag, wrap, fixedlength, distribution panel, and vertical labels. HWRAP When you select flag, wrap, fixed, or vertical print modes, the labelmaker remains in that print mode until you either select another hot key or select normal mode. To select normal mode ♦ Press + FLAG . Printing in Flag Mode Flag labels wrap around a wire or cable leaving the text part of the label extending out from the cable. See Figure 10. FM RM FM RM FM RM U Figure 10 The default diameter is 3/8" (9 mm). The length of the label tape between the label text (U) is approximately 1.1" (28.27 mm). The text on flag labels is automatically printed on both ends of the label leaving a blank space in the middle that wraps around the cable. When the label is applied to the cable, both ends of the label are applied back to back leaving a tail or flag. The result is a label that can be read from both sides. To print a flag label 1. Press . FLAG 2. Enter the text for the label and press . Printing Wrap Labels You can create labels that wrap around a cable or wire. A line of text is placed horizontally or vertically along the width of the cable, and repeated so that you can read the label from any angle. Horizontal Wrap Labels Horizontal wrap labels can contain letters, numbers, or symbols. To print horizontal wire wraps 1. Press . HWRAP 2. Enter the label text and press . Left Speaker Left Speaker Left Speaker Left Speaker 123 123 123 123 Vertical Wrap Labels 123 123 123 Vertical wrap labels are printed in a fixed length of 1.5" (40 mm) and can contain up to five letters or numbers; but no symbols. To print vertical wrap labels 1. Press + . HWRAP 2. Enter the label text and press . Printing Fixed-Length Labels Normally, the length of the label is determined by the length of the text entered. However, you may wish to make a label for a specific purpose that is a fixed length regardless of the length of the text. 8