Dynex DX-L19-10A User Manual (English) - Page 20

Changing channel settings 17 2 Press or to highlight Channel, then press . The Channel menu opens. Adding or changing a channel label If a channel is not already labeled, you can label the channel to make it easier to identify. You can also relabel a channel that is already labeled. To label a channel: 1 Press MENU. The on-screen menu opens. 3 Select the signal source of the channel you want to set up on the favorites list. 4 Press or to highlight Favorite, then press ENTER. The favorite channel list opens. 2 Press or to highlight Channel, then press . The Channel menu opens. 5 Press or to highlight the channel you want to add to the favorite list, then press ENTER to mark the channel. A check mark appears if the channel is added to the list. The check mark disappears if you delete the channel from the list. Note: If the list has more than one page, press or to scroll through the pages. 6 Press EXIT to close the menu. 7 To select a channel in the favorite channel list, press FAVORITE, press or to highlight the channel, then press ENTER. 3 Select the signal source of the channel you want to label. 4 Highlight Channel No. , then press or to select the channel you want to label. 5 Press or to highlight Channel Label. 6 Press ENTER to open channel label screen. The Channel Label screen opens. 7 Press or to select a character, then press or to move to the next position. Repeat this step to add more characters. 8 Press MENU to exit to the previous menu.