Epson 5550C User Manual - Page 148
lamp failure., Placing the projector in this position keeps dust - bulb
UPC - 010343820807
View all Epson 5550C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Warning: Let the lamp cool before replacing it. Also, don't touch the glass portion of the lamp assembly; this can cause premature lamp failure. 1. Turn off the projector and unplug the power cord from the electrical outlet and the projector. Wait at least 20 minutes for the bulb to cool. 2. Place the projector on its side with the handle at the top so you can easily access the lamp cover. Note: Placing the projector in this position keeps dust from getting inside the projector housing. 3. Use a screwdriver, coin, or similar object to loosen the retaining screw on the lamp cover. When the screw is loose, lift off the lamp cover. (You can't remove this screw from the cover.) 2 1 Replacing the Lamp 135
Replacing the Lamp
135
Warning:
Let the lamp cool before replacing it. Also, don’t touch
the glass portion of the lamp assembly; this can cause premature
lamp failure.
1.
Turn off the projector and unplug the power cord from the
electrical outlet and the projector. Wait at least 20 minutes for
the bulb to cool.
2.
Place the projector on its side with the handle at the top so you
can easily access the lamp cover.
Note:
Placing the projector in this position keeps dust from
getting inside the projector housing.
3.
Use a screwdriver, coin, or similar object to loosen the retaining
screw on the lamp cover. When the screw is loose, lift off the
lamp cover. (You can’t remove this screw from the cover.
)
2
1