Epson 5700i Product Information Guide - Page 12

Removing Spilled Toner, Cleaning the Printer Case, Transporting the Printer

Page 12 highlights

EPSON EPL-5700i 5. Replace the photoconductor unit, then replace the developer cartridge. 6. Close the printer cover. 7. Remove all the paper from the paper tray and clean the tray with a clean, dry, lint-free cloth. Removing Spilled Toner If toner spills inside the printer, do not use the printer until you remove all the spilled toner. If only a small amount of toner is present, carefully wipe out the inside of the printer with a clean, dry, lint-free cloth. If a large amount of toner is present, use a small vacuum cleaner (available from computer supply stores) to remove it. Then carefully wipe with a clean, dry, lint-free cloth. Caution: Toner and other fine powders can damage some vacuum cleaners. Be sure to read the instructions for your vacuum cleaner before you use it on spilled toner. Note: If you spill toner on your clothing, rinse it off with cold water. Do not use hot water as it may cause the toner to leave a permanent stain. Cleaning the Printer Case If the printer's outer case is dirty or dusty, turn off the printer and clean it with a clean, lint-free cloth, dampened with a mild detergent. Transporting the Printer If you need to transport your printer, carefully repack it using the original box and packing materials as follows: 1. Turn off the printer. 2. Lift off the paper tray cover. Remove all paper from the paper tray. 3. Grasp the base of the paper tray with both hands, press inward on the top edges, and pull it out of the printer. X 4. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer. 5. Remove the optional 500-sheet lower cassette unit, if installed. 6. Replace the printer's protective materials, then repack the printer in its original box. Caution: Never use alcohol or thinner to clean the printer cover; these chemicals can damage the components and the case. Be careful not to get water on the printer mechanism or any electronic components. Related Documentation TM-EPL5700I PL-EPL5700I CPD 9246 CPD 9291 EPSON EPL-5700i Service Manual EPSON EPL-5700i Parts Price List EPSON EPL-5700i Setup Guide (Getting Ready) EPSON EPL-5700i User's Guide 12 - EPSON EPL-5700i 9/99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

EPSON EPL-5700i
12 -
EPSON EPL-5700i
9/99
5.
Replace the photoconductor unit, then replace the
developer cartridge.
6.
Close the printer cover.
7.
Remove all the paper from the paper tray and clean the tray
with a clean, dry, lint-free cloth.
Removing Spilled Toner
If toner spills inside the printer, do not use the printer until
you remove all the spilled toner.
If only a small amount of toner is present, carefully wipe out
the inside of the printer with a clean, dry, lint-free cloth.
If a large amount of toner is present, use a small vacuum
cleaner (available from computer supply stores) to remove it.
Then carefully wipe with a clean, dry, lint-free cloth.
Caution:
Toner and other fine powders can damage some vacuum cleaners.
Be sure to read the instructions for your vacuum cleaner before you
use it on spilled toner.
Note
:
If you spill toner on your clothing, rinse it off with cold water. Do not
use hot water as it may cause the toner to leave a permanent stain.
Cleaning the Printer Case
If the printer’s outer case is dirty or dusty, turn off the printer
and clean it with a clean, lint-free cloth, dampened with a
mild detergent.
Caution:
Never use alcohol or thinner to clean the printer cover; these
chemicals can damage the components and the case. Be careful not
to get water on the printer mechanism or any electronic components.
Transporting the Printer
If you need to transport your printer, carefully repack it using
the original box and packing materials as follows:
1.
Turn off the printer.
2.
Lift off the paper tray cover. Remove all paper from the
paper tray.
3.
Grasp the base of the paper tray with both hands, press
inward on the top edges, and pull it out of the printer.
X
4.
Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
5.
Remove the optional 500-sheet lower cassette unit, if
installed.
6.
Replace the printer’s protective materials, then repack the
printer in its original box.
Related Documentation
TM-EPL5700I
EPSON EPL-5700i Service Manual
PL-EPL5700I
EPSON EPL-5700i Parts Price List
CPD 9246
EPSON EPL-5700i
Setup Guide
(
Getting
Ready
)
CPD 9291
EPSON EPL-5700i
User’s Guide