Epson C107001 User Manual - Page 71
Adjusting the Tear-off Position, TEAR OFF, the LOAD/EJECT, LF/FF
UPC - 010343157507
View all Epson C107001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Tear Off Adjusting the tear-off position If the perforation is not aligned with the tear-off edge, adjust the tear-off position by following the steps below: 1. Make sure the paper is in the tear-off position and the TEAR OFF light is on. 2. While holding down the ALT button, press the LOAD/EJECT button to adjust the tear-off position to a lower position on the page or press the LF/FF button to adjust the tear-off position to a higher position on the page. The printer remembers the new tear-off position. 3. Tear off any printed pages. 4. When you begin printing, the printer automatically feeds the paper back to the loading position and begins printing. (You c a n also manually feed the paper back to the loading position by pressing the LOAD/EJECT or TEAR OFF button.) Note: l The printer has a minimum and maximum tear-off position. If you try to advance the loading position beyond these limits, the printer beeps and the paper stops moving. l When the paper reaches the factory-set tear-off position, the printer beeps and paper feeding pauses briefly. Use the factory setting as a reference point when adjusting the tear-off position. 3-18 Using the Printer