Epson CX5600 User Guide - Page 71
Print Nozzle Check Pattern
UPC - 010343865341
View all Epson CX5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
You may need to clean the print head up to 2 times. You can also turn the Epson Stylus CX5600 Series off and wait at least 6 hours. Then try printing again. From the Computer 1. Load a few sheets of plain paper in the sheet feeder. 2. Windows: Right-click the printer icon in the bottom right corner of your screen (the taskbar) and select Head Cleaning. Macintosh: Open the Applications folder, open the EPSON Printer Utility 2, select Stylus CX5600, and click OK. Then select Head Cleaning. 3. Follow the on-screen instructions to start the cleaning cycle, which lasts around 1 minute. The light flashes throughout the cleaning cycle and stays on green when the cycle is finished. Caution: Never turn off the Epson Stylus CX5600 Series during a cleaning cycle or you may damage it. 4. When the light stops flashing and remains on, you can check to see if the nozzles are clean: Windows: Click Print Nozzle Check Pattern and click Print. Macintosh: Click Confirmation and click Next. 5. Check the nozzle check pattern that prints to see if there are gaps in the lines. Nozzles are clean. Nozzles need cleaning 6. If there are no gaps, click Finish. If there are gaps or the pattern is faint, click Clean to clean the print head again. You may need to clean the print head up to 2 times. You can also turn the Epson Stylus CX5600 Series off and wait at least 6 hours. Then try printing again. 71