Epson CX5600 User Guide - Page 78

The Epson Stylus CX5600 Series is performing routine maintenance.

Page 78 highlights

• Run a printer check. If the test page prints, make sure your software is installed correctly. Printing Noise Occurs, Even Though Nothing Prints • Check to see if the print head nozzles are clogged. • The Epson Stylus CX5600 Series won't operate properly if it's tilted or at an angle. Place it on a flat, stable surface that extends beyond the base in all directions. Noise Occurs When Epson Stylus CX5600 Series Sits for a While The Epson Stylus CX5600 Series is performing routine maintenance. Printout Is Cut-off When Copying A4-size Documents You need to select the correct paper size for copying. To select A4 as the paper size, press the button and the Iniciar button simultaneously for 3 seconds to turn on the Epson Stylus CX5600 Series. Note: To change the paper size back to Letter, turn off the Epson Stylus CX5600 Series, then press the button and the Iniciar button for 3 seconds. Paper Problems Paper Does Not Feed Correctly Paper Jams Paper Does Not Eject or Ejects Wrinkled Paper Does Not Feed Correctly • If paper doesn't feed, remove it from the sheet feeder. Reload it against the right side, behind the tab, then press in the tab on the edge guide and slide it against the paper. Make sure the paper is not above the arrow mark inside the edge guide. • If multiple pages feed at once, remove the paper from the sheet feeder, fan the edges to separate the sheets, then reload it. • Load only up to the recommended number of sheets. If you're printing on both sides of the paper, try loading fewer sheets. • Use new, smooth, high-quality paper, that is not curled, creased, old, or too thin. Make sure to load it printable side up. Paper Jams If paper jams, follow these steps: 1. Press one of the buttons to eject the paper. 2. If paper is still jammed, gently pull it out from the output tray or sheet feeder. 3. If paper is stuck inside, turn off the Epson Stylus CX5600 Series. Then open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX5600 Series back on. 78

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

78
Run a printer check
. If the test page prints, make sure your software is installed correctly.
Printing Noise Occurs, Even Though Nothing Prints
Check to see if the print head nozzles
are clogged.
The Epson Stylus CX5600 Series won’t operate properly if it’s tilted or at an angle. Place it on
a flat, stable surface that extends beyond the base in all directions.
Noise Occurs When Epson Stylus CX5600 Series Sits for a While
The Epson Stylus CX5600 Series is performing routine maintenance.
Printout Is Cut-off When Copying A4-size Documents
You need to select the correct paper size for copying. To select A4 as the paper size, press the
button and the
Iniciar
button simultaneously for 3 seconds to turn on the Epson Stylus
CX5600 Series.
Note:
To change the paper size back to Letter, turn off the Epson Stylus CX5600 Series, then press the
button and the
Iniciar
button for 3 seconds.
Paper Problems
Paper Does Not Feed Correctly
Paper Jams
Paper Does Not Eject or Ejects Wrinkled
Paper Does Not Feed Correctly
If paper doesn’t feed, remove it from the sheet feeder. Reload it against the right side, behind
the tab, then press in the tab on the edge guide and slide it against the paper. Make sure the
paper is not above the arrow mark inside the edge guide.
If multiple pages feed at once, remove the paper from the sheet feeder, fan the edges to
separate the sheets, then reload it.
Load only up to the recommended number of sheets
. If you’re printing on both sides of the
paper, try loading fewer sheets.
Use new, smooth, high-quality paper, that is not curled, creased, old, or too thin. Make sure to
load it printable side up.
Paper Jams
If paper jams, follow these steps:
1.
Press one of the
buttons to eject the paper.
2.
If paper is still jammed, gently pull it out from the output tray or sheet feeder.
3.
If paper is stuck inside, turn off the Epson Stylus CX5600 Series. Then open the scanner,
remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus
CX5600 Series back on.