Epson CX7800 Product Information Guide - Page 12

Printing from a Digital Camera, Scanning a Photo, Document, Film, or Slide, User's Guide - user manual

Page 12 highlights

Epson Stylus CX7800 If the memory card contains DPOF information, the following image appears on the LCD screen: 7. Connect the USB cable that came with your camera to the USB connector on the front of your Epson Stylus CX7800. 4. Press the paper type button to select Plain Paper or Photo Paper (whichever you loaded). If you select Plain Paper, the photos print with a white border. If you select Photo Paper, the photos print borderless, to the edge of the paper. 5. Press the paper size button to select Letter, 4"x 6", or 5"x7". 6. Press the x Start button to start printing. Note: To cancel printing, press the y Stop/Clear Settings button. 7. When you are done printing, remove the memory card by pulling it straight out of its slot. 8. Turn on your camera. The Print All/Pict Bridge light turns on and one of the following icons is displayed on the LCD screen: Printing from a Digital Camera If your camera is PictBridge®- or USB DIRECT-PRINT™compatible, you can print your JPEG photos by connecting your digital camera directly to your Epson Stylus CX7800. Your photos must be sized from 80 × 80 pixels to 9200 × 9200 pixels. 1. Make sure your Epson Stylus CX7800 is not printing from a computer. 2. Remove any memory cards from slots. 3. Load the type of paper you want to use (see page 4). Load enough sheets for the number of photos you'll be printing. 4. Press the Memory Card mode button to select Print All/ PictBridge. 5. Press the paper type button to select Plain Paper or Photo Paper (whichever you loaded). If you select Plain Paper, the photos print with a white border. If you select Photo Paper, the photos print borderless, to the edge of the paper. 6. Press the paper size button to select Letter, 4"x 6", or 5"x7". 9. Use your camera to select the photos you want to print, adjust any necessary settings, and print your photos. See your camera's manual for details. Note: If your camera is not compatible with PictBridge or USB Direct Print, the icon shown below appears on the LCD screen. Epson cannot guarantee the compatibility of any cameras. Depending on the Epson Stylus CX7800 settings and your digital camera settings, some combinations of paper type, size, and layout may not be supported. In addition, some of your digital camera settings may not be reflected in the printed output. Scanning a Photo, Document, Film, or Slide You can use your Epson Stylus CX7800 to scan a photo, document, film, or slide and save it on your computer. You can even automatically restore faded color photographs as you scan. For details, see your on-screen User's Guide. 12 - Epson Stylus CX7800 8/05

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

Epson Stylus CX7800
12
-
Epson Stylus CX7800
8/05
If the memory card contains DPOF information, the
following image appears on the LCD screen:
4.
Press the paper type button to select
Plain Paper
or
Photo
Paper
(whichever you loaded).
If you select
Plain Paper
, the photos print with a white
border. If you select
Photo Paper
, the photos print
borderless, to the edge of the paper.
5.
Press the paper size button to select
Letter
,
4”x
6”
, or
5”x7”
.
6.
Press the
x
Start
button to start printing.
Note:
To cancel printing, press the
y
Stop/Clear Settings
button.
7.
When you are done printing, remove the memory card by
pulling it straight out of its slot.
Printing from a Digital Camera
If your camera is PictBridge
®
- or USB DIRECT-PRINT
-
compatible, you can print your JPEG photos by connecting
your digital camera directly to your Epson Stylus CX7800.
Your photos must be sized from 80 × 80 pixels to
9200 × 9200 pixels.
1.
Make sure your Epson Stylus CX7800 is not printing from
a computer.
2.
Remove any memory cards from slots.
3.
Load the type of paper you want to use (see page 4). Load
enough sheets for the number of photos you’ll be printing.
4.
Press the
Memory Card
mode button to select
Print All/
PictBridge
.
5.
Press the paper type button to select
Plain Paper
or
Photo
Paper
(whichever you loaded).
If you select
Plain Paper
, the photos print with a white
border. If you select
Photo Paper
, the photos print
borderless, to the edge of the paper.
6.
Press the paper size button to select
Letter
,
4”x
6”
, or
5”x7”
.
7.
Connect the USB cable that came with your camera to the
USB connector on the front of your Epson Stylus CX7800.
8.
Turn on your camera. The
Print All/Pict Bridge
light turns
on and one of the following icons is displayed on the LCD
screen:
9.
Use your camera to select the photos you want to print,
adjust any necessary settings, and print your photos. See
your camera’s manual for details.
Note:
If your camera is not compatible with PictBridge or USB Direct Print,
the icon shown below appears on the LCD screen. Epson cannot
guarantee the compatibility of any cameras.
Depending on the Epson Stylus CX7800 settings and your digital
camera settings, some combinations of paper type, size, and layout
may not be supported. In addition, some of your digital camera
settings may not be reflected in the printed output.
Scanning a Photo, Document, Film, or
Slide
You can use your Epson Stylus CX7800 to scan a photo,
document, film, or slide and save it on your computer.
You can even automatically restore faded color photographs as
you scan. For details, see your on-screen
User’s Guide
.