Epson Expression 800 User Manual - Page 75
SCSI Interface, Specifications,
View all Epson Expression 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
SCSI Interface Interface type Functions Logic level Electrical standard ID setting ANSI Standard X3.131-1994 (SCSI 2) BUS FREE phase ARBITRATION phase SELECTION/RESELECTION phase COMMAND phase (the Logical Unit Number is fixed at 0 and the Command Link Function is not supported) DATA phase DATA IN phase DATA OUT phase STATUS phase MESSAGE phase MESSAGE IN phase MESSAGE OUT phase ATTENTION condition RESET condition TTL compatible ANSI Standard X3.131-1994 (SCSI 2) Can be set from 0 to 7 (factory setting is 2); asterisk (*) setting is only used when transporting the scanner Specifications Page 75
Specifications
Page 75
SCSI Interface
Interface type
ANSI Standard X3.131-1994 (SCSI 2)
Functions
BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMAND phase
(the Logical Unit Number is fixed at 0 and the Command Link Function
is not supported)
DATA phase
DATA IN phase
DATA OUT phase
STATUS phase
MESSAGE phase
MESSAGE IN phase
MESSAGE OUT phase
ATTENTION condition
RESET condition
Logic level
TTL compatible
Electrical standard
ANSI Standard X3.131-1994 (SCSI 2)
ID setting
Can be set from 0 to 7 (factory setting is 2); asterisk (*) setting is only
used when transporting the scanner