Epson Stylus 1500 User Setup Information - PC - Page 30

Testing the Printer, mm wide. If you load smaller paper, the print head will

Page 30 highlights

8. Lower the output tray to the printing position. Make sure that the rear edge guide of the paper tray is positioned under the output tray. The rear edge guide must be under the output tray to allow room for the paper loaded in the sheet feeder and to prevent a paper jam. Testing the Printer Before continuing, test the printer to ensure it is functioning properly. For the self test, use paper that is at least 8.25 inches (210 mm) wide. If you load smaller paper, the print head will spray ink directly onto the platen, which could mar future printouts. 1. Press the Operate button to turn off the printer. c Caution: Never turn off the printer by unplugging it or turning off a power strip. Always turn off the printer by pressing the Operate button. 1-20 Setting Up the Printer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

8.
Lower the output tray to the printing position. Make sure
that the rear edge guide of the paper tray is positioned
under the output tray. The rear edge guide must be under
the output tray to allow room for the paper loaded in the
sheet feeder and to prevent a paper jam.
Testing the Printer
Before continuing, test the printer to ensure it is functioning
properly. For the self test, use paper that is at least 8.25 inches
(210 mm) wide. If you load smaller paper, the print head will
spray ink directly onto the platen, which could mar future
printouts.
1.
Press the
Operate
button to turn off the printer.
c
Caution:
Never turn off the printer by unplugging it or turning off
a power strip. Always turn off the printer by pressing the
Operate
button.
1-20
Setting Up the Printer