Epson Stylus 1500 User Setup Information - PC - Page 32
Connecting the Printer to Your PC, interface according to the instructions in your computer
View all Epson Stylus 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Connecting the Printer to Your PC You need a shielded, twisted-pair parallel cable to connect your printer to your computer. The cable must have a D-SUB, 25-pin male connector for your computer and a 36-pin, Centronics compatible connector for the printer's parallel interface. 1. Make sure both the printer and computer are turned off. 2. Plug the 36-pin end of the cable connector securely into the printer's interface connector. Then squeeze the wire clips together until they lock in place on both sides. If your cable has a ground wire, attach it to the ground connector next to the interface connector. 3. Plug the 25-pin end of the cable into the computer's parallel interface according to the instructions in your computer manual. 4. Turn on the printer by pressing the Operate button and then turn on your computer. Now see Chapter 2 for instructions on installing and using the printer driver. 1-22 Setting Up the Printer