Epson Stylus COLOR 3000 Service Manual - Page 11
Specification, 3.1 Printing Specifications
View all Epson Stylus COLOR 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Product Descriptions 1.3 Specification This section provides detailed information on the EPSON Stylus COLOR 3000. 1.3.1 Printing Specifications Print method Nozzle configuration On demand Ink jet Monochrome Color (magenta, cyan, yellow) 128 nozzles (32 x 4 staggered) 64 nozzles (32 x 4 staggered, each color) Figure 1-2. Nozzle Configuration Print direction Bi-directional with logic-seeking Print speed and printable columns Table 1-3. Print Speed and Printable Columns for Character Mode Character Pitch 10 cpi (Pica) 12 cpi (Elite) 15 cpi 17.1 cpi (Pica condensed) 20 cpi (Elite condensed) Printable Columns 161 193 242 276 322 Draft Speed 800 cps 960 cps 1200 cps 1368 cps 1600 cps LQ Speed 400 cps 480 cps 600 cps 684 cps 800 cps Table 1-4. Print Speed and Printable Area for Raster Graphic Mode Print Mode Printable Area Available Dot CR Speed 180 dpi X 180 dpi 360 dpi X 360 dpi 720 dpi X 720 dpi 1440 dpi X 720 dpi *1 16.37 inch 16.37 inch 16.37 inch 16.37 inch 2947 5893 11786 11786*2 40 ips 20 ips 20 ips 10 ips *1 Printing at 1440 X 720 dpi is available only using driver microweave. *2 Can be printed by sending following command sequence. 1. Set print speed to 10 ips. 2. Print a 180 X 720 raster image. 3. Advance the paper using an increment of 31/720 inch. 4. Move the print position horizontally using an increment of 1/1440 inch. 5. Print a 180 X 720 raster image. 6. Advance the paper using an increment of 31/720 inch. 7. Repeat steps 2 to 6 . 1-4 Rev. A