Epson Stylus COLOR 3000 Service Manual - Page 99
Ink Sensor Assembly Removal, Ink Sensor /Ink Cartridge Sensor Assembly Removal
View all Epson Stylus COLOR 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Disassembly and Assembly 3.2.11.12 Ink Sensor Assembly Removal 1. Remove the printer mechanism unit. (See Section 3.2.6.) 2. Remove the paper eject frame unit. (See Section 3.2.11.6.) 3. Remove the pump unit. (See Section 3.2.11.7.) 4. Remove the ink cartridge holders. (See Section 3.2.11.11.) 5. Remove the ink sensor connector cables from the clump on the ink cartridge holder mounting plate. 6. Remove 1 screw (CBS, 3X10) securing the ink sensor assembly to the ink cartridge holder mounting plate. Then remove the ink sensor assembly. 3.2.11.13 Ink Cartridge Sensor Assembly Removal 1. Remove the printer mechanism unit. (See Section 3.2.6.) 2. Remove the paper eject frame unit. (See Section 3.2.11.6.) 3. Remove the pump unit. (See Section 3.2.11.7.) 4. Remove the ink cartridge sensor connector cables from the clump on the ink cartridge holder. 5. Remove the ink cartridge holder unit. (See Section 3.2.11.11.) 6. Remove 2 screws (CB, 3X10) securing the pin holder to the pin holder assembly and 2 hexagon nuts (M3). Then remove the pin holder. 7. Remove 1 pan camera B tight screw (2X10) securing the ink cartridge sensor assembly to the pin holder. Then remove the ink cartridge sensor assembly. Figure 3-26. Ink Sensor /Ink Cartridge Sensor Assembly Removal 3-30 Rev. A