Fisher and Paykel E522BRWFD5 User Guide - Page 18

Important

Get Fisher and Paykel E522BRWFD5 PDF manuals and user guides View all Fisher and Paykel E522BRWFD5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

INSTALLATION INSTRUCTIONS Important! ●● All connections must be checked for leaks. ●● Ensure white ¼" (6 mm) tubing is routed away from sharp objects, sharp corners (beware of kinking the tube as this will stop water flow), clear of the refrigerator rear compartment and not in a location where it can be kinked or squashed. ●● Ensure all push-fit connections are firmly pushed into place. The tube should push in 5/8" (16 mm) before reaching the stop. ●● If tubing is removed at any point, re-cut the end and re-insert. Tubing must be fully inserted to avoid leaks. ●● To remove tube from connection points first turn off the isolating faucet. Gently push PART: 838587 DRAWING: 838587 6 the dispen7sing pad a few8 times using9 a glass or container to remove the static line pressure. Push in the collet firmly while pulling back on the tubing at the same time, as shown in Diagram 10. Diagram 10 Diagram 11 Connection to water supply System tested and certified by NSF International against NSF/ANSI Standard 53 for the reduction of Asbestos, Atrazine, Benzene, Cyst, Carbofuran, Lead, Lindane, Mercury, P-Dichlorobenzene, Toxaphene & Turbidity; against Standard NSF/ANSI 42 for the reduction of Chlorine Taste and Odor and Nominal Particulate Class I to a capacity of 750 gallons (2,838 liters). 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
16
INSTALLATION INSTRUCTIONS
IMPORTANT!
●
±
All connections must be checked for leaks.
●
±
Ensure white ¼” (6 mm) tubing is routed away from sharp objects, sharp corners
(beware of kinking the tube as this will stop water flow), clear of the refrigerator rear
compartment and not in a location where it can be kinked or squashed.
●
±
Ensure all push-fit connections are firmly pushed into place. The tube should push in
±” (16 mm) before reaching the stop.
●
±
If tubing is removed at any point, re-cut the end and re-insert. Tubing must be fully
inserted to avoid leaks.
●
±
To remove tube from connection points first turn off the isolating faucet. Gently push
the dispensing pad a few times using a glass or container to remove the static line
pressure. Push in the collet firmly while pulling back on the tubing at the same time,
as shown in Diagram 10.
System tested and certified by NSF International against NSFÀANSI Standard 53 for the
reduction of Asbestos, Atrazine, Benzene, Cyst, Carbofuran, Lead, Lindane, Mercury,
P-Dichlorobenzene, Toxaphene & Turbidity; against Standard NSFÀANSI 42 for the
reduction of Chlorine Taste and Odor and Nominal Particulate Class I to a capacity of
750 gallons (2,838 liters).
Diagram 11
Diagram 10
Connection to water supply