Fisher and Paykel RDV3-304-N Installation Guide - Page 10

WALL SURFACE Non-combustible BACKGUARD CONSIDERATIONS BACKGUARD OPTIONS min. 30" (762mm) min. 1/2" (13mm) NO BACKGUARD CUSTOM BACKGUARD made from non-combustible materials LOW THIN BACKGUARD BGRV2-1230, BGRV2-1236, BGRV2-1248 HIGH THIN BACKGUARD BGRV2-3030, BGRV2-3036, BGRV2-3048 Combustible RANGE 30" models 36" models 48" models min. 6" (152mm) Induction models: 0 NO BACKGUARD HIGH THICK BACKGUARD WITH ANGLED TRIM BGRV2-3030H, BGRV2-3036H, BGRV2-3048H RANGE MOUNT LOW BACKGUARD BGRV2-1230 BGRV2-1236 BGRV2-1248 WALL MOUNT HIGH BACKGUARD, LOW SHELF BGRV2-3030 BGRV2-3036 BGRV2-3048 WALL MOUNT HIGH BACKGUARD, HIGH SHELF BGRV3-3030H BGRV3-3036H BGRV3-3048H z Installations against non-combustible surfaces: you may install the range without a backguard or choose any of the three backguards. z Installations close to combustible surfaces (above the cooking surface): without a backguard, there must be a min. 6" (152mm) clearance. z Installations immediately against combustible surfaces (above the cooking surface): you must purchase and fit the Wall Mount High Backguard High Shelf and Angled Vent Trim. z Non-combustible surfaces: as defined in 'National Fuel Gas Code' (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by UL. Clearances of less than 6" (152mm) must be approved by the local codes and/or by the local authority having jurisdiction. 10 BACKGUARD WIDTH INCHES MM 29 7/8 759 35 7/8 911 47 7/8 1216 Note: Backguards can be purchased separately. All ranges come fitted with an Integral Vent Trim only. For more information on Backguard installation, refer to the separate instructions provided with your backguard. Backguard Installation Instructions can also be downloaded from our website, www.fisherpaykel.com