Fisher and Paykel RDV3-304-N Installation Guide - Page 12

1. REMOVE TOE KICK UNPACKING THE RANGE 2. REMOVE DOORS 1 Remove both screws to detach the toe kick from the range. 1 Open the door completely and open the hinge locks fully on both sides. Refer to page 13 for more detail FRONT VIEW HINGE DETAIL Holding the door on both sides, 2 Lift toe kick up and rotate towards you to remove. 2 lift door back up to 45° and carefully pull the door out and away from the hinges. PROFILE VIEW PROFILE VIEW 3. REMOVE FROM PALLET Remove front bolts IMPORTANT! 1 Remove the two shipping bolts made visible by packing sheet Two people required. removing the toe kick. restraining packing sheet strap Before restraining the product to the Remove lower guard 2 Unscrew the lower guard panel from the back of hand truck, place two cardboard packing sheets (shipped with the product) against both side panels as shown. the range to remove. Tilt the product and insert hand truck. Remove rear bolts 3 Remove the two shipping bolts made visible by removing the lower guard. DO NOT insert the hand truck to the front of the product. Restrain the product and packing sheets to the hand truck using straps and tilt onto hand truck. Set pallet aside and pull product to the installation location. 12