Fisher and Paykel RDV3-304-N Installation Guide - Page 13
Removing and refitting the oven door(s
View all Fisher and Paykel RDV3-304-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
REMOVING AND REFITTING THE OVEN DOOR(S) IMPORTANT! z Take care, the oven door is heavy. z Do not lift the oven door by its handle. Doing so may damage the door. z Ensure the oven and the door are cool before you begin to remove the door. z Before removing the door, ensure there is a large enough clear, protected surface in the kitchen to rest the door on. REMOVE DOOR REFIT THE DOOR Holding the door at 45°, carefully align 1 Open the door completely. 1 the hinge tongues with the hinge slots. Push the door in until you feel the latches locate into position on each side. Open the door completely and ensure 2 Open the hinge locks fully 2 on both sides. both hinges are secured by the correct notches. Rotate the locks up into the closed position ensuring they rest inside 3 the slots completely. Note: Incorrect Holding the door on both sides, lift installation will prevent door from 3 door back up to 45° and carefully pull the door out and away from correctly sealing. the hinges. Close the oven door ensuring that 4 when closed, the door is vertical and parallel to any surrounding cabinetry. 13