Fisher and Paykel RF170WLKUX6 Installation Guide - Water Filter Replacement - Page 10
For Rf730q Models With Filter Tool
View all Fisher and Paykel RF170WLKUX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5 FOR RF730Q MODELS WITH FILTER TOOL Removing the old filter Note: It is not necessary to turn the water supply off when removing the water filter. It is easier to remove the water filter with the water turned on. A B 1 Locate the filter hatch between the two produce bins inside the fresh food compartment. Lift the hatch to access the filter tool (A). C 2 Turn the filter tool 90° counterclockwise to the unlock position (B). 3 Remove the tool and pull out the filter from the filter casing. Discard the old filter (C). - If you have difficulty removing the filter, an additional tool may be required e.g. pliers (not supplied). 8 4 Return the filter tool to its storage position and close the filter hatch.
8
5
FOR RF730Q MODELS WITH FILTER TOOL
Removing the old filter
Note: It is not necessary to turn the water supply off when removing the water filter. It is easier to remove the water filter with the water turned on.
1
Locate the filter hatch between the two produce bins inside
the fresh food compartment. Lift the hatch to access the
filter tool (
A
).
A
2
Turn the filter tool 90° counterclockwise to the unlock
position (
B
).
B
C
3
Remove the tool and pull out the filter from the filter
casing. Discard the old filter (
C
).
–
If you have difficulty removing the filter, an
additional tool may be required e.g. pliers (not
supplied).
4
Return the filter tool to its storage position and close
the filter hatch.