Fisher and Paykel RF170WLKUX6 Installation Guide - Water Filter Replacement - Page 5

2 FOR RF605, RF203, RF523 AND RF172 MODELS Installing the new filter Note: It is not necessary to turn the water supply off when installing the water filter. B 1 Remove the plastic wrapping from the new filter. 2 Align the filter correctly (A). Insert the filter into the filter head. C A 3 Push the filter firmly all the way into the filter head then rotate the filter clockwise 90° until it locks into place (B). - If the filter will not turn, ensure the filter is correctly aligned (A), to allow the filter to be pushed firmly into the filter head. - Ensure the filter is fully rotated 90° to allow the water to flow. D 4 Push the entire filter back into the bracket (C). 5 Push the cover up and into the slots at the top of the filter housing until it clicks and the base locks firmly into place (D). IMPORTANT! After installation, the water filter MUST be flushed. Refer to 'Flushing the water filter' for details. 3