Fisher and Paykel RF170WLKUX6 Installation Guide - Water Filter Replacement - Page 16

8 FOR RS60 MODELS Removing the old filter Note: It is not necessary to turn the water supply off when removing the water filter. It is easier to remove the water filter with the water turned on. The filter is located behind the toe kick grille. Installing the new filter Note: It is not necessary to turn the water supply off when installing the water filter. A A 1 Push grille flap to access filter. Pull tool outwards to remove (A). B 1 Remove packaging. Ensure filter handle is positioned horizontally and push all the way in. Rotate clockwise to lock into place (A). B 2 Using the filter tool, rotate filter 90° anti-clockwise to unlock and remove (B). - If you have difficulty removing the filter, an additional tool may be required e.g. pliers (not supplied). 14 2 Slot tool into place and push to close the grille flap (B). IMPORTANT! After installation, the water filter MUST be flushed. Refer to 'Flushing the water filter' for details.