Fisher and Paykel RF170WLKUX6 Installation Guide - Water Filter Replacement - Page 6
For Refrigerators With External Filter
View all Fisher and Paykel RF170WLKUX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3 FOR REFRIGERATORS WITH EXTERNAL FILTER Removing the old filter Note: It is not necessary to turn the water supply off when removing the water filter. It is easier to remove the water filter with the water turned on. filter mounting bracket filter head A filter cartridge B C wall External water filter attached to wall 1 Hold the base of the filter firmly and pull towards you. The filter will tilt towards you from the bracket (A). 2 Rotate the filter counterclockwise until it releases from the filter head (B). - If the filter is difficult to remove, run water through the filter by dispensing water. 3 Pull down vertically to remove the filter from the bracket (C). Discard the old filter. - A small amount of water will drip after you remove the filter. This is normal. 4