Fisher and Paykel RF170WLKUX6 Installation Guide - Water Filter Replacement - Page 11
Installing the new filter, After installation, the water filter MUST be, flushed. Refer to 'Flushing
View all Fisher and Paykel RF170WLKUX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5 FOR RF730Q MODELS WITH FILTER TOOL Installing the new filter Note: It is not necessary to turn the water supply off when installing the water filter. A B 1 Locate the filter hatch between the two produce bins inside the fresh food compartment. Lift the hatch to access the filter tool (A). 2 Remove the plastic wrapping from the new filter. 3 Place the filter tool on the filter handle (B). lugs D C E 4 Align the filter correctly (C). Insert the filter into the filter housing until the tool is flush and in the unlock position (D). 5 Push the filter firmly in and rotate clockwise 90° into the lock position (E) to allow water to flow. - If the filter will not turn, ensure the filter is correctly aligned, (C) to allow the filter to be pushed firmly into the filter head. 6 Close the filter hatch. IMPORTANT! After installation, the water filter MUST be flushed. Refer to 'Flushing the water filter' for details. 9