Frigidaire FEQ332ES Installation Instructions (All Languages) - Page 4
Location Of Your Dryer - stack kit
UPC - 012505374395
View all Frigidaire FEQ332ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
LOCATION OF YOUR DRYER DO NOT INSTALL YOUR DRYER: 1. In an area exposed to dripping water or outside weather conditions. 2. In an area where it will come in contact with curtains, drapes, or anything that will obstruct the flow of combustion and ventilation air. 3. On carpet. Floor MUST be solid with a maximum slope of 1 inch (2.54 cm). INSTALLATION IN RECESS OR CLOSET 1. A dryer installed in a bedroom, bathroom, recess or closet, MUST be exhausted outdoors. 2. No other fuel burning appliance shall be installed in the same closet as the Gas dryer. 3. Your dryer needs the space around it for proper ventilation. DO NOT INSTALL YOUR DRYER IN A CLOSET WITH A SOLID DOOR. 4. A minimum of 120 square inches (774.2 square cm) of opening, equally divided at the top and bottom of the door, is required. Air openings are required to be unobstructed when a door is installed. A louvered door with equivalent air openings for the full length of the door is acceptable. MINIMUM INSTALLATION CLEARANCES (Inches) FRONT Alcove or Under counter 0 (0 cm) SIDES REAR TOP 0 (0 cm) 0 (0 cm) 15 (38.1 cm) Closet 1 (2.54 cm) 0 (0 cm) 0 (0 cm) 15 (38.1 cm) Closet door ventilation required: 2 louvered openings each 60 square inches (387 square centimeters) - 3 inches (7.6 cm) from bottom and top of door. THIS DRYER MUST BE EXHAUSTED OUTDOORS. 5. The following illustrations show minimum clearance dimensions for proper operation in a recess or closet installation. 60 SQ. IN. (387.1 SQ. CM) 0" (0 cm) 15" (38.1 cm) 1" (2.54 cm) 0" (0 cm) 60 SQ. IN. (387.1 SQ. CM) CLOSET DOOR NOTE: Under counter and stack models - 0 inches (0 cm) for sides, rear, and top. 0" (0 cm) 1" (2.54 cm) 0" (0 cm) 0" (0 cm) UNDER COUNTER INSTALLATION If an under counter* installation is desired, the dryer MUST have a top sheet kit installed, P/N 131629100. Kit is available from an authorized parts distributor. *Custom-sized countertop is required. 4