Frigidaire GRSC2352AD Complete Owners Guide - Page 12

12 DOOR HANDLE INSTALLATION Handles may vary according to model CAUTION Wear gloves and safety goggles and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp (some models). IMPORTANT To ensure proper installation of handles, please review these instructions and illustrations thoroughly prior to installing the handles. 1. Remove handles from carton and any other protective packaging. 2. Position the freezer handle end caps over the upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing toward the refrigerator door. 3. While holding the handle firmly against door, fasten the upper and lower Allen set screws (B) with the supplied Allen wrench. 4. Repeat steps 2 and 3 to install refrigerator handle. Ensure the holes for the set screws are facing towards the freezer door.  NOTE Tighten and sub-flush all set screws (place the Allen set screw just below the surface of the end cap) of the handle end cap. Draw the end caps tight to the freezer and refrigerator doors with no gaps. To avoid scratching the metal door, keep the door open while torquing down the set screws. Freezer Upper End Cap Refrigerator Upper End Cap Door Door Ensure Handle Set Screws are Facing Each Other with Doors Closed Door Door Freezer Lower End Cap Refrigerator Lower End Cap