Frigidaire GRSC2352AD Complete Owners Guide - Page 8

Door Opening, Guidelines for final positioning, of your unit, Meet all of these conditions

Page 8 highlights

8 INSTALLATION Door Opening  NOTE The doors are designed to shut by themselves within a 20 degree opening. Position your unit to allow easy access to a counter or table when removing food. For the best use of drawers and freezer baskets, position the appliance where both doors can fully open. Meet all of these conditions by raising or lowering the adjustable front rollers. To level the cabinet using the front rollers: 1. Open both doors and remove the toe grille (see "Toe Grille Installation and Removal" in INSTALLATION). 2. Close the doors and use a wrench to raise (clockwise) or lower (counterclockwise) the front rollers. Guidelines for final positioning of your unit: • Rest all 4 corners of the cabinet firmly on the floor. • Level the cabinet at the front and rear. • Tilt the sides ¼" (6 mm) from front to back (to ensure the doors close and seal properly). • Align the doors with each other and level. 3. Ensure both doors are bind-free with their seals touching the cabinet on all 4 sides.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

8
INSTALLATION
Door Opening
Position your unit to allow easy access to
a counter or table when removing food.
For the best use of drawers and freezer
baskets, position the appliance where
both doors can fully open.
Guidelines for final positioning
of your unit:
Rest all 4 corners of the cabinet
firmly on the floor.
Level the cabinet at the front and rear.
Tilt the sides
¼
" (6 mm) from front
to back (to ensure the doors close
and seal properly).
Align the doors with each other
and level.
Meet all of these conditions by
raising or lowering the adjust-
able front rollers.
To level the cabinet using the front rollers
:
1.
Open both doors and remove the
toe grille (see “
Toe Grille Installation
and Removal
” in
INSTALLATION
).
2.
Close the doors and use a wrench
to raise (clockwise) or lower
(counterclockwise) the front rollers.
3.
Ensure both doors are bind-free with
their seals touching the cabinet on all
4 sides.
NOTE
T
he doors are designed to shut by
themselves within a 20 degree opening.