Frigidaire GRSC2352AD Complete Owners Guide - Page 9
Set Screw, some models, Hinge, Flange, Open Door, 16 Wrench and, 32 Hex Key some models, Door Stop
View all Frigidaire GRSC2352AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INSTALLATION 9 To level the doors using the adjustable lower hinge: NOTE Some models will not have a set screw. For those models follow steps 2 through 4. 1. Before leveling either door, remove the set screw that locks the door height into position. (The door cannot be adjusted without the set screw removed). 2. If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning the adjustment screw counterclockwise using a 7/16" wrench. (See illustration.) 3. If the freezer door is lower than the refrigerator door, raise the freezer door by turning the adjustment screw counterclockwise using a 7/16" wrench. (See illustration.) 4. After leveling, verify the door stop contacts the lower hinge and the top of the door does not contact the upper hinge through full movement of the door (from fully closed to fully open). Door Stop Flange Open Door Hinge Flange Set Screw (some models) Hinge 7/16" Wrench and 3/32" Hex Key (some models) 5. Reinstall the set screw, locking the door height. 6. Replace the toe grille by fitting it into place (see "Toe Grille Installation and Removal" in INSTALLATION).