Garmin G1000 Pilot's Training Guide (-05) - Page 20
Exercise 5.2: Practice Optional
View all Garmin G1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Exercise 5.2: Practice (Optional) Using the GIFD PC-based Simulator, power up the system. 1. Verify the Jeppesen database effective dates and note those dates in the space provided below. 2. Enter the transponder code "3470" and set the transponder to 'ALT' mode. 3. In COM1, enter 124.30 MHz as the active frequency and 133.00 MHz as the standby frequency. 4. In COM2, enter 135.325 MHz as the active frequency and 118.90 MHz as the standby frequency. 16 GIFD Pilot's Training Guide 190-00368-05 Rev. B
16
GIFD Pilot’s Training Guide
190-00368-05
Rev. B
Exercise 5.2: Practice (Optional)
Using the GIFD PC-based Simulator, power up the system.
1.
Verify the Jeppesen database effective dates and note those dates in the space provided
below.
2.
Enter the transponder code “3470” and set the transponder to ‘ALT’ mode.
3.
In COM1, enter 124.30 MHz as the active frequency and 133.00 MHz as the standby
frequency.
4.
In COM2, enter 135.325 MHz as the active frequency and 118.90 MHz as the standby
frequency.