Garmin G1000 Pilot's Training Guide (-05) - Page 37
Ground Lesson 9
View all Garmin G1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Ground Lesson 9 EMERGENCY PROCEDURES Objectives Upon completion of this lesson, the pilot should be able to determine the types of emergencies with associated component failures and take appropriate action during emergencies or failures. Resources • GIFD Pilot's Guide • GIFD PC-based Simulator Exercise 9.1: Emergencies and Failure Modes 1. If one display fails, what happens to the remaining displays? The system enters Reversionary Mode (also called Display Backup Mode)-flight instruments and engine displays are presented in a single-screen format (refer to the System Overview in the Pilot's Guide for specific details on airframes with dual PFDs). 2. How is an AHRS failure indicated on the GIFD? An AHRS failure is indicated by red-"Xs" over the affected flight instruments and a loss of the horizon line on the PFD. 3. When the AHRS and/or ADC fail, what remedial action should be taken by the pilot? The pilot should refer to standby instruments. 4. What information is presented to the pilot when a display is operating in Reversionary Mode? Engine instruments, attitude, airspeed, altitude, vertical speed, and HSI information are shown on a display operating in Reversionary Mode. 5. Describe the aircraft on-board power sources that remain in case of alternator failure and also provide an explanation as to their operation, including a basic description of each power bus. Refer to the AFM or POH. 190-00368-05 Rev. B GIFD Pilot's Training Guide 33