Garmin GPSMAP 62st Owner's Manual - Page 48
Troubleshooting, Problem, Solution, Setup, Reset, Reset All, Settings, Rocker - problems
View all Garmin GPSMAP 62st manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Appendix Troubleshooting Problem Solution The screen or buttons do 1. Remove the batteries. not respond. How do I 2. Reinstall the batteries. reset the device? Note: This does not erase any of your data or settings. I want to reset all the customized settings back to the factory defaults. From the main menu, select Setup > Reset > Reset All Settings. My device does not acquire satellite signals. 1. Take your device out of parking garages and away from tall buildings and trees. 2. Turn on the device. 3. Remain stationary for several minutes. The batteries do not last Decrease the backlight settings (page 37). long. How do I know my device is in USB mass storage mode? On the device, a screen appears showing the Garmin logo and the USB symbol. On your computer, you should see a new removable disk drive in My Computer on Windows computers and a mounted volume on Mac computers. My device is connected to the computer, but it will not go into mass storage mode. You may have loaded a corrupted file. 1. Disconnect the device from your computer. 2. Turn off the device. 3. Press and hold the Rocker while you connect the device to your computer. Continue pressing the Rocker for 10 seconds or until the device goes into mass storage mode. 44 GPSMAP 62 Series Owner's Manual