Garmin LiveScope LVS32-IF Installation Instructions - Page 14

© 2018 Garmin Ltd. or its subsidiaries

Add to My Manuals
Save this manual to your list of manuals

Section	Page
Important Safety Information	1
Software Update	1
Tools Needed	1
Mounting Considerations	2
Cable Considerations	2
Routing the Transducer Cable	3
Installing the Transducer on a Trolling Motor	3
Assembling the Trolling Motor Barrel Mount Hardware	3
Installing the Transducer on a Trolling Motor	4
Trolling Motor Mount Orientation	5
Installing the Transducer on a Trolling Motor Shaft	5
Trolling Motor Shaft Bracket Orientation	5
Assembling the Trolling Motor Shaft Mount Hardware	6
Installing the Transducer on the Trolling Motor Shaft	6
Trolling Motor Shaft Orientation	7
Installing the Transducer on a Transom	7
Optional Spray Shield Accessory	7
Assembling the Transom-Mount Hardware	7
Installing the Transom-Mount Hardware	8
Mounting the GLS 10 Black Box Device	9
Installation Diagram	10
Power Cable Extensions	11
Blink Codes	12
Transducer Settings and Operation	12
Calibrating the Compass	12
Specifications	13
Panoptix LiveScope LVS32 Specifications	13
Panoptix LiveScope GLS 10 Sonar Module Specifications	13
Open-Source Software License	13

Match case Limit results 1 per page

support.garmin.com