Garmin Oregon 200 Owner's Manual - Page 45
Connecting Your Oregon to a Computer, Installing a microSD™ Card, Setup, System, Demo Mode
UPC - 753759078553
View all Garmin Oregon 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
To turn Demo Mode on, touch Setup > System > GPS > Demo Mode. Connecting Your Oregon to a Computer You can connect the Oregon to your computer using the supplied USB cable. To connect your Oregon to your computer: 1. Lift the weather cap on the bottom of the Oregon. 2. Insert the smaller connector on the USB cable into the USB miniB jack. 3. Connect the other end of the cable to a USB port on your computer. Appendix Installing a microSD™ Card The Oregon microSD data card tray is located beneath the AA batteries. Purchase microSD cards from an electronics supplier or purchase preloaded MapSource® detailed map data cards from your Garmin dealer. Go to http://buy.garmin.com for compatible map products. To install or remove a microSD card: 1. Lift the latch on the back of the Oregon (page 2) and remove the battery cover and the batteries. 2. Lift the metal cover. 3. Push the card into the microSD card tray and close the metal cover. Oregon Series Owner's Manual 37