Garmin zumo 395LM Owners Manual - Page 21

Position Reporting: Shares your position information with Garmin to improve content. Travel History: Allows the device to record information for the myTrends, Where I've Been, and Trip Log features. Clear Travel History: Clears your travel history for the myTrends, Where I've Been, and Trip Log features. Restoring Settings You can restore a category of settings or all settings to the factory default values. 1 Select Settings. 2 If necessary, select a settings category. 3 Select > Restore. Device Information Specifications Water resistance Operating temperature range Charging temperature range Power input (CLA, motorcycle, or external power) Battery life Battery type Battery voltage range Radio frequency protocol IEC 60529 IPX7 From -20° to 55°C (from -4° to 131°F) From 0° to 45°C (from 32° to 113°F) From 12 to 24 Vdc Up to 4 hr., depending on usage and settings Lithium-ion battery From 3.5 to 4.1 V 2.4 GHz ANT+® wireless communications protocol 2.4 GHz Bluetooth wireless technology *The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com /waterrating. Charging the Device NOTE: This Class III product shall be powered by an LPS power supply. You can charge the battery in the device using any of these methods. • Install the device in the mount, and connect the mount to vehicle power. NOTICE Do not connect the device directly to the vehicle power cable. • Connect the device to a computer using a USB cable. The device may charge slowly when connected to a computer. Some portable computers may not charge the device. • Connect the device to an optional power adapter accessory, such as a wall power adapter. You can purchase an approved Garmin AC-DC adapter suitable for home or office use from a Garmin dealer or www.garmin.com. Device Maintenance Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage. Never use a hard or sharp object to operate the touchscreen, or damage may result. Cleaning the Outer Casing NOTICE Avoid chemical cleaners and solvents that can damage plastic components. 1 Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent solution. 2 Wipe the device dry. Cleaning the Touchscreen 1 Use a soft, clean, lint-free cloth. 2 If necessary, lightly dampen the cloth with water. 3 If using a dampened cloth, turn off the device and disconnect the device from power. 4 Gently wipe the screen with the cloth. Avoiding Theft • Remove the device and mount from sight when not in use. • Remove the residue left on the windshield by the suction cup. • Do not keep your unit in the glove compartment. • Register your device at http://my.garmin.com. Resetting the Device You can reset your device if it stops functioning. Hold the power key for 12 seconds. Removing the Device, Mount, and Suction Cup Removing the Device from the Mount 1 Press the release tab or button on the mount. 2 Tilt the device forward. Removing the Mount from the Suction Cup 1 Turn the device mount to the right or left. 2 Apply pressure until the socket on the mount releases the ball on the suction cup. Removing the Suction Cup from the Windshield 1 Flip the lever on the suction cup toward you. 2 Pull the tab on the suction cup toward you. Changing the Fuse in the Vehicle Power Cable NOTICE When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. The vehicle power cable does not work unless it is assembled correctly. If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter. 1 Rotate the end piece counter clockwise to unlock it. À Device Care NOTICE Avoid dropping your device. TIP: You may need to use a coin to remove the end piece. Device Information 17