GE DPGT750GCPL Owners Manual - Page 10
About the, Drying, Options, Adjusting the, Time Settings, Cycle Status, Screen
UPC - 084691079743
View all GE DPGT750GCPL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
About the Drying Options Summary Screen GEAppliances.com Touch the OPTIONS pad on the Touch Screen to select drying options. After selecting any drying options, press OK to save your setting. Delay Start Touch the DELAY START pad repeatedly to set a delay time of up to 12 hours. The countdown time will be shown in the display. Extended Tumble Minimizes wrinkles by adding approximately 20 minutes of no-heat tumbling after clothes are dry. Touch EXTENDED TUMBLE to turn the feature on or off. If set, the Extended Tumble time will not be included in the cycle time shown in the display. The dryer will signal for the first 6 minutes during Extended Tumble. End-of-Cycle Signal Alerts you that the cycle is complete. The clothes should be removed when the beeper goes off so wrinkles won't set in. Touch END OF CYCLE SIGNAL to select the volume or to turn the beeper off. The new volume will be saved as the default setting. OPTIONS OK DELAY START EXTENDED TUMBLE END OF CYCLE SIGNAL 1 HOUR (on some models) OPTIONS OK DELAY START DAMP SIGNAL EXTENDED TUMBLE END OF CYCLE SIGNAL Adjusting the Time Settings About the Cycle Status Screen 10 You can adjust the time setting for the dry cycle, delay start and extended tumble times. Touch the TIME pad on the Summary Screen; then choose the time you wish to adjust. To change the dry cycle time, select CYCLE TIME; then use the arrows to select more or less drying time. If the Cycle Time is changed, the dryness sensor will be turned off. To change the delay start or extended tumble time, select DELAY TIME or EXTENDED TUMBLE; then follow the instructions in the About the Drying Options section. After you press START, a Cycle Status screen will appear to indicate what cycle the dryer is in and the time remaining in the cycle. DRYING - The dryer is sensing the moisture level of the load. SENSING - The dryer is determining if the correct dryness level has been reached. COOL DOWN - The load is dry and may be removed (the dryer will continue to blow cool air for up to 5 minutes). EXTENDED TUMBLE - The load is dry and may be removed (the drum will continue to turn without heat for up to 20 minutes). ADJUST TIME SETTINGS CYCLE TIME DELAY TIME EXTENDED TUMBLE