GE GFDR485GFRR Installation Instructions - Page 31
Installation Instructions, REVERSING THE DOOR SWING if desired
View all GE GFDR485GFRR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installation Instructions REVERSING THE DOOR SWING (if desired) IMPORTANT NOTES • Read the instructions all the way through before starting. • Handle parts carefully to avoid scratching paint. • Set screws down by their related parts to avoid using them in the wrong places. • Provide a non-scratching work surface for the doors. • Normal completion time to reverse the door swing is 30-60 minutes. IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed. These instructions are for changing the hinges IURPWKHULJKWVLGHWRWKHOHIWVLGH³LI\RXHYHUZDQW to switch them back to the right side, follow these same instructions and reverse all references to the left and right. TOOLS YOU WILL NEED #2 Phillips-head screwdriver T-25 torx driver 1/4" nut driver DOOR PARTS 2 - #8 x 1/2" Screws (striker plate) 10 - #8 x 7/8" Screws (door assembly) 6 - #8 x 1/2" Screws (hinge assembly and handle spacer) 2 - #8 x 1/2" Screws (door mask) 2 - #10 x 5/8" Screws (hinge) 1 - #8 x 3/8" Screws 2 - #10 x 5/8" Screws (hinge pin) (panel plug) 2 - Panel Plugs 1 - Door Mask 1 - Chrome Door Cover Assembly 1 - Handle Spacer BEFORE YOU START Unplug the dryer from its electrical outlet. 1 - Inner Door Assembly 31