GE GFDR485GFRR Installation Instructions - Page 8
Light, Volume, Lock Control, eMonitor, Clean Filter Message, Display
View all GE GFDR485GFRR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Control settings. 14 Light (on some models) Press the button to turn on the light in the This only controls the light when the door is dryer. shut. Press the button again to turn the light off. NOTE: The light will turn off by itself after one minute when the door is shut. 15 Volume Alerts you that the cycle is complete. The beeper Press Volume to select low, medium or high will continue to sound every minute for the next volume, or to turn the beeper off. 5 minutes, until the clothes have been removed. The clothes should be removed when the beeper goes off so wrinkles don't set in. 16 Lock Control You can lock the controls to prevent any To unlock the dryer controls, press and hold selections from being made. Or you can lock the Lock Control button for 3 seconds. or unlock the controls after you have started a cycle. A sound is made to indicate the lock/unlock status. Children cannot accidentally start the dryer by touching buttons with this option selected. The indicator light above the button will illuminate when the controls are locked. To lock the dryer, press and hold the Lock Control button for 3 seconds. NOTE: The Power button can still be used when the machine is locked. 17 eMonitor (on some models) The eMonitor lights display the relative energy use of your selected cycle and options. They are provided as an energy guide and range from Good (1 light) to Better (5 lights). Cycle (time), dryness level, temperature, and additional tumble options can increase or decrease your energy efficiency. Some cycles will not provide a display. 18 Clean Filter Message This message represents only a reminder and This message will disappear after the Start/ does not always appear when the filter needs Pause button is pressed. Even though you may cleaning. The filter should be cleaned after every have already cleaned the filter (before or after drying cycle is complete. the Power button has been pressed), the "Clean Filter" message will still be displayed until the Start/Pause button is activated. 19 Display Displays the approximate time remaining until Then lights will "race" in the display. This the end of the cycle. means the dryer is continuously monitoring As the cycle begins, you will see an initial approximate total cycle time in the display. the amount of moisture in the load. The lights will continue until the dryer senses a low level of moisture in the load. At that point, the dryer will calculate and display the approximate time remaining. 8