GE GFDR485GFRR Installation Instructions - Page 42
a Steam Cycle
View all GE GFDR485GFRR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Before you call for service... PROBLEM Small amount of water on floor in front of dryer Possible Causes Inadequate load size for steam cycle selected, excess steam condenses inside cabinet and leaks out What To Do • If using the Steam Dewrinkle cycle, manually reduce the cycle time. If using the Steam Refresh cycle, add more garments to the load. Water on floor in back of dryer Loose water hose connection to valve Hose missing rubber washer at connection with valve • Tighten connection. • Install rubber washer provided with hose. Dryer makes water noises Water valve is open filling steam • This is normal. generator Steam generator is dispensing • This is normal. steam into drum Water drips from door when opened after a Steam Cycle Steam condenses on inner door • This is normal. Cannot see steam at beginning of cycle Steam released at different times in the cycle • This is normal. Cannot see steam at any The steam nozzle might be time during cycle clogged with debris from your water supply • Call 800.GE.CARES to order nozzle replacement kit WE25M71 or to request a technician to replace this for you. Garments still wrinkled Too many garments after steam cycle • Load fewer garments; manually increase time. Dryer continues to tumble after display says Complete Ext Tumble was selected • Ensure Ext Tumble option is not selected. For the Steam Refresh cycle, Ext Tumble will automatically be turned on and cannot be turned off. 42