GE GFDR485GFRR Installation Instructions - Page 34
Re-assemble Door Assembly, Re-locate Hinge Pin Screw, Re-install Door Assembly
View all GE GFDR485GFRR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installation Instructions REVERSING THE DOOR SWING (if desired) 6 RE-ASSEMBLE DOOR ASSEMBLY A. Place the chrome door cover on a soft flat surface with the plastic outer protect cover facing down. B. Lower the inner door frame onto the chrome door cover. C. Ensure that all screw holes are aligned and re-install 10 screws (#8 x 7/8"). 8 RE-INSTALL DOOR ASSEMBLY A. Install the door assembly by guiding the hinge pin screw head through the key hole on the front panel and lowering the door assembly into place. B. Open the door approximately 140 degrees to provide access to the screw hole locations. C. Starting with the top screw, re-install the 2 screws (#10 x 5/8") which secure the door to the front panel. 7 RE-LOCATE HINGE PIN SCREW A. Remove the hinge pin screw from the hole labeled "D". B. Re-install the hinge pin screw into the hole labeled "W". 34