GE PD900DP Installation Instructions - Page 12

Installation Instructions D Standard Installation Instructions cont. Replacing the Oven Door NOTE: The oven door is heavy. You may need help lifting the door high enough to slide it into the hinge slots. Do not lift the door by the handle. D11 Push the hinge locks up against the front frame of the oven cavity, to the locked position. Hinge in Locked Position D8 Lift the oven door by placing one hand on each side. The door is heavy, so you may need help. Do not lift the door by the handle. Notch of Hinge Securely Fitted into Bottom of Hinge Slot D12 Close the oven door. D9 With the door at the same angle as the removal position (halfway between the closed and broil stop position, seat the notch of the hinge arm into the bottom edge of the hinge slot. The notch of the hinge arm must be fully seated into the bottom of the slot. Bottom Edge of Slot Hinge Arm D13 Check for Proper Installation of Anti-Tip Bracket Lower the oven door and gently apply medium force at the handle end until movement of the range is detected. Continue pressing until the anti-tip bracket is engaged and movement stops. A small amount of movement is acceptable at the back of the range top, but it should be stable and not tip once the anti-tip bracket is engaged. Hinge Notch D10 Open the oven door as far as it will open. 12