Gigabyte GA-8IPE1000 Pro-G User Manual - Page 16
Step 1: Install the Central Processing Unit CPU
View all Gigabyte GA-8IPE1000 Pro-G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English Step 1: Install the Central Processing Unit (CPU) Before installing the processor,adhere to the following warning: If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper installation. Please change the insert orientation. Please make sure the CPU type is supported by the motherboard. Step 1-1: CPU Installation Angling the ro d to 650 Socket Actuation Lever 1. Angling the rod to 65-degree maybe feel a kind of tight, and then continue pull the rod to 90-degree when a noise "cough" made. 2. Pullthe rod to the 90-degree directly. Pin1 indicator Pin1 indicator 3. CPU Top View GA-8IPE1000 Series Motherboard 4. Locate Pin 1 in the socketand look for a (golden) cut edge on the CPU upper corner. Then insert the CPU into the socket. - 12 -