Gigabyte GA-8IPE1000 Pro-G User Manual - Page 33
IR_CIR, F_ USB1 / F_USB2Front USB Connector, Yellow
View all Gigabyte GA-8IPE1000 Pro-G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English 16) IR_CIR Make sure the pin 1 on the IR device is aling with pin one the connector. To enable the IR/CIR function on the board, you are required to purchase an option IR/CIR m odule. For detail inform ation please contact your autherized Giga-Byte distributor. To use IR function only, please connect IR module to Pin1 to Pin5. Be careful with the polarity of the IR/CIR connector. Check the pin assignment carefully while you connect the IR/CIR cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional IR/CIR cable, please contact your local dealer. 6 10 15 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition VCC NC IRRX GND IRT X NC CIRRX VCC CIRTX NC 17) F_ USB1 / F_USB2(Front USB Connector, Yellow ) Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorrect connection between the cable and connector will make the device unable to wor k or even dam age it. For optional front USB cable, please contact your local dealer. 2 10 19 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition Power Power USB0 DX-/USB6 DXUSB1 Dy-/USB7 DyUSB0 DX+/USB6 DX+ USB1 Dy+/USB7 Dy+ GND GND No Pin NC - 29 - Hardware Installation Process