Home » Haier Manuals » Laundry Washers » Haier HWM65-728 » Manual Viewer

Haier HWM65-728 User Manual

Haier HWM65-728 Manual

View all Haier HWM65-728 manuals

Add to My Manuals
Save this manual to your list of manuals

Haier HWM65-728 manual content summary:

Haier HWM65-728 | User Manual - Page 1
's Manual Fully Automatic Washing Machine This manual is for HWM60-728 HWM65-728 Index y Safety precautions 2 y Packing list 4 y Names of the parts 4 y Installation and adjustment 5 y Preparation before washing 9 y Use the operation buttons ....11 y Disposal after washing ....... 13 y Trouble
Haier HWM65-728 | User Manual - Page 2
reliably. If possible,please adopt electric leakage protector. z The washing machine must be positioned so that the plug is accessible. Be sure the manufacturer or its service agent or a similarly qualL¿ed person in order to avoid a hazard. z Do not let the machine share one receptacle with other
Haier HWM65-728 | User Manual - Page 3
or heavy items (such as the kettle with hot water ) on the washing machine. z Do not wash laundries with volatile materials (such as thinner, petrol etc.) z The children shall not approach the working washing machine. z Keep the machine away from direct sunlight and heat source like the heater. z Do
Haier HWM65-728 | User Manual - Page 4
automatic Water inlet hose washing machine Bottom plate Tapping screws User's manual (One Package) Warranty card Names of the parts Top lid component Detergent box Control panel seat Outer tub cover Lint filter(2 pieces) Balance ring Inner tub Filter cover(2 pieces) Pulsator Control panel film
Haier HWM65-728 | User Manual - Page 5
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. After opening the package, please lean the washing machine gently down on soft items (like towel cloth,blanket, etc
Haier HWM65-728 | User Manual - Page 6
Confirm the water faucet z It is required that the front end shall be longer than 10mm. z The exit end face of the faucet shall be flat and smooth.If not please file it to avoid leakage. water faucet, suitable water faucet, not suitable The exit end face of the faucet Connection between the
Haier HWM65-728 | User Manual - Page 7
the water inlet hose 1.Close the water faucet. 2. Press the locking lever. Push down the slider.Then pull off the water inlet hose. If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw. Locking lever Slider 7
Haier HWM65-728 | User Manual - Page 8
direction of the drain hose 1.Dismantle the back cover of the washing machine. 2.Take off the drain hose frame. Put down the drain less than 10cm , or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2 Do not trample or press the drain hose. 3 If the
Haier HWM65-728 | User Manual - Page 9
z Connect the water inlet hose. Open the water faucet. z Con¿rm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline. z Put
Haier HWM65-728 | User Manual - Page 10
z It is suggested not to use high sudsing detergent. Washing powder with poor quality or long time storage maybe caked. Please pay attention to cleaning the detergent box in time. Figure 2(HWM65-728) How to use the softener(only applicable for HWM65-728) z The usage and dose of the softener as
Haier HWM65-728 | User Manual - Page 11
can choose one or more process DELAY PROCESS PROGRAM WATER LEVEL START/PAUSE among soak,wash,rinse,spin. The button is invalid if you choose "QUICK" or "TUB DRY" program. You can not choose soak process if you choose "WOOL" program. During the standard program,the washing machine can detect
Haier HWM65-728 | User Manual - Page 12
and spin after putting the damageable clothes into tuck net, to avoid scathe. Wash the laundries that are prone to lose colors separately from other laundries. When washing start or opening cover intermitting, the washing machine will begin to work after a period time, this is normal phenomenon. Do
Haier HWM65-728 | User Manual - Page 13
machine is spinning, the machine will stop running and alarm. 8 Finish washing After finishing washing, the washing machine will cut off the power automatically. Disposal after washing the machine. Clean the detergent box and set it on the control panel seat( applicable for the model HWM65-728):
Haier HWM65-728 | User Manual - Page 14
¿lter A(applicable for the model HWM65-728) and the lint filter B(applicable for the model HWM60-728): 1 Push down the spring piece at the top of the lint dismantle the water inlet hose). z Do not store water in the washing machine for a long period. Drain the water completely after each using. z
Haier HWM65-728 | User Manual - Page 15
Trouble-shooting Answer to question (If there's breakdown, please pull off the power displays E6. The water level sensor is bad. z Please contact the after-sales service department. The machine does not act Not wash Is there power failure? Is the power plug inserted tightly? Is the water level
Haier HWM65-728 | User Manual - Page 16
water remained in the factory inspection of in the first use of the machine. performance. The wash procedure is paused. The cloth sensor is checking the cloth, it will /37L, HIGH/44L, MAXIMUM/51L HWM60-728 HWM65-728 0.03 MPa ~ 1.0 MPa Washing/spinning capacity 6.0kg/6.0kg 6.5kg/6.5kg HWM60