Haier HWM65-728 User Manual - Page 11

Use the operation buttons Off Push the "POWER ON/OFF" button to On: indicate the program about to run,or indicate the selected mode or indicate the water level switch on the power. When the power is on, push it again to Flashing: indicate the running program switch off the power. Push the "POWER ON/OFF" button to switch on the power.If the "START/PAUSE" button is not pushed, the washing machine During sensing, it displays "--" . During delay procedure, it displays the will automatically switch off the power after 5 minutes. remained delay time (in hours). During operation of programs,it displays the remaining time (in minutes). In case of abnormal phenomenon, it displays the abnormal symbols (see to Page 15). After the power is switched on,press it to start the machine. During working, push it to pause. The digitron displays the time remained (in minutes) before the washing is ¿nished. During pause, push this button to restart and go on working Push "DELAY" button, the digitron displays the delay time of washing (in hours). The indicator flashes to indicate that the delay function is operating. Push "DELAY" button to display the delay mode. REMAIN(MINUTES) RESERVE(HOURS) SOAK WASH RINSE SPIN STANDARD HEAVY GENTLE QUICK BLANKET COTTEN WOOL TUB DRY MAXIMUM HIGH MEDIUM LOW EXTRA LOW POWER ON/OFF You can choose one or more process DELAY PROCESS PROGRAM WATER LEVEL START/PAUSE among soak,wash,rinse,spin. The button is invalid if you choose "QUICK" or "TUB DRY" program. You can not choose soak process if you choose "WOOL" program. During the standard program,the washing machine can detect the laundries automatically. After detection,it will set the water level to suitable value automatically among the water level "LOW","MEDIUM","HIGH" and "MAXIMUM". You can also set water level by yourself.After the machine is started, it will not set water level automatically. You shall push the "START/PAUSE" Program Applicable situation STANDARD Washing the normal laundries button to make new setting. If there's water inside the tub, the machine can not detect the laundries and will display water level "MEDIUM" .If wet laundries are put in, it HEAVY Washing the bigger and heavier laundries may display water level "MAXIMUM".You must set suitable water level by yourself. GENTLE Washing the woollen textiles or underwear If QUICK program is selected, it will display water level "LOW",the water level can not be adjusted. QUICK Washing the laundries with small quantity and light soil If TUB DRY program is selected, the water level will not respond. BLANKET COTTON Washing the blanket Washing the cotton textiles During operation of wash , rinse and soak program, you can push down the water level button to add water. When you release the button, or it reaches the overÀow water level, WOOL TUB DRY Washing the woollen textiles Drying the inner tub and the outer tub, which can avoid growing mildew the machine will stop adding water. The water level decided may be different from actual value because of the different moisture level of the laundries. 11