Haier HWM65-728 User Manual - Page 16

Phenomena The spinning is intermittent when it starts. Explanation Balance the laundries to avoid slanting. Push the "spin" button to select "Spin", but it doesn't work. The program is setting the drain time. Some time is needed before it starts spinning. There may be some water flowing out of the drain hose It is the water remained in the factory inspection of in the first use of the machine. performance. The wash procedure is paused. The cloth sensor is checking the cloth, it will add water after 48 seconds. The pulsator pauses during water inlet in wash and rinse. It is to avoid splashing during water inlet. When the power plug is inserted,computer board indicator is switched on, and the machine starts working. It is the special resume function. In the case of power failure or the power plug is loose during washing, the machine can save the running program, and resume the program after the power supply is recovered. You do not need to set the program again Speci¿cation Water level / Water quantity (about) Injection pressure EXTRA LOW/16L, LOW/24L, MEDIUM/32L, HIGH/40L, MAXIMUM/46L EXTRA LOW/21L, LOW/29L, MEDIUM/37L, HIGH/44L, MAXIMUM/51L HWM60-728 HWM65-728 0.03 MPa ~ 1.0 MPa Washing/spinning capacity 6.0kg/6.0kg 6.5kg/6.5kg HWM60-728 HWM65-728